CDM835 Wheel Loader
LONGKING
| Overall Data | Steering System | |||||||||||||||
| Bucket Capacity (m3) | 1.8 | Type | Hydraulic Load Sensing System | |||||||||||||
| Rated Payload(kg) | 3500 | Cylinders-bore×Stroke(mm) | 2-80×315 | |||||||||||||
| Operating Weight(kg) | 11620±300 | Steering Pump | Gear Pump | |||||||||||||
| Traction Force(kN) | 106±3 | System Pressure(MPa) | 15 | |||||||||||||
| Breakout Force(kN) | 103±3 | Flowrate(L/min/rpm) | 88/2200 | |||||||||||||
| Travel speeds (km/h): | Steering Angle | ±35° | ||||||||||||||
| I | II | III | Hydraulic System | |||||||||||||
| Forward | 6.5 | 12.0 | 32.0 | Lift Cylinders-bore×Stroke(mm) | 2-125×784 | |||||||||||
| Reverse | 6.8 | 12.5 | 33.5 | Tilt Cylinder-bore×Stroke(mm) | 1-140×553 | |||||||||||
| Engine | WP6G140E22 DF CUMMINS 6BT5.9-C130 | Model of Implement Pump | Gear Pump | |||||||||||||
| Rated Power(kW/rpm) | 105/2200 97/2200 | Flowrate(L/min/rpm) | 246/2200 | |||||||||||||
| Peak Torque(Nm/rpm) | 580/1400 560/1400-1600 | System Pressure(MPa) | 16 | |||||||||||||
| Starting Voltage(V) | 24 | Pilot Control System Pressure (MPa) | 2.5 | |||||||||||||
| Drive Train | Hydraulic Cycle Time, Rated Load in Bucket(in second): | |||||||||||||||
| Torque Converter | Single-stage, Single-turbine, 3-element | Raise(Loaded) | Dump | Lower(Empty) | Total | |||||||||||
| Torque Ratio | 3.2 | 5.5 | 1.3 | 3.7 | 10.5 | |||||||||||
| Transmission | Countershaft Powershift Transmission | Electrical System | ||||||||||||||
| Gear | 3F/3R | System Voltage(V) | 24 | |||||||||||||
| Pressure of Transmission(MPa) | 1.1~1.5 | Battery (2 in series)(Ah) | 105 | |||||||||||||
| Main Reducer | Spiral Bevel, 1-stage Reduction | Lamp Voltage(V) | 24 | |||||||||||||
| Final Reducer | Planetary Reduction | Service Refill Capacity | ||||||||||||||
| Tire | 17.5-25 L-3 12PR TT | Fuel Tank(L) | 200 | |||||||||||||
| Brake System | Hydraulic Tank(L) | 173 | ||||||||||||||
| Service Brake | Single Circuit Caliper,Dry Brake | Crankshaft(L) | 17 | |||||||||||||
| Setting Pressure (MPa) | 0.7-0.78 | Transmission(L) | 36 | |||||||||||||
| Parking Brake | Flexible Shaft Controlled Caliper | Front Axle(L) /Rear Axle(L) | 18.5/18.5 | |||||||||||||
| Emergency Brake | Flexible Shaft Controlled Caliper | Air Conditioning System | ||||||||||||||
| Heating Capacity(W) | 5900 (±10%) | |||||||||||||||
| Cooling Capacity(W) | 4800 (±10%) | |||||||||||||||
ONLINE MESSAGE
ONE KEY CONTACT
Shandong Sea Project Machinery Group Company
CopyRight © 2002-2019 All Rights Reserved.